Turn up your heat & lower your cost!
Economical, EPA Approved and American Made
Alternative Heating Systems

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

eZe Flex 1" O2 Barrier PEX 3-Wrap, 4"

eZe Flex 1" O2 Barrier PEX 3-Wrap, 4"
Brand: Z-Supply
Product Code: eZe100PEX3B
Availability: In Stock
Price: $7.39

Available Options

* Pipe Length:

   - OR -   

eZe Flex 1" PEX with Oxygen (O2) Barrier, 3 Wraps of Silver Foam Reflective Insulation inside 4" White Pipe


Please Call for the best price and for current stock/availability.  There may be price incentives and specials that do not show on this site.


During September and October cut lengths of pipe (less than 250') may take an extra day or two to ship.

eze flex pex front w side no bkd 2

eZe Flex has a tested temperature loss* of just 0.87° per 100’ !!

Availble in pex and pex-al-pex.

1" pex (.875 ID) standard with other sizes and 3 line available.
1" pex-al-pex (1.032" ID) standard.
All eZe Flex pipes feature a pull cord and foot markers for your convenience.


Needless to say we are very pleased with the test results and believe our Silverfoam insulation is a contributing factor. Silverfoam has a 40% higher thermal resistance than standard PE.  Z-Supply is the only underground supply manufacture to give you the Silverfoam advantage. 

Because Silverfoam is so effective it is not necessary to go to a larger casing and 5 wraps of insulation. eZe Flex tests compare favourably with 5 wrap products with less cost and without the hassle of a larger pipe making eZe Flex a better value by far.

Our tests were conducted by a third party and under normal outdoor wood boiler conditions running at 5 GPM, with buried pipe and under a 63.5K BTU load. While we believe these results to be accurate and the installation to be typical, they are not guaranteed nor warrantied, and individual results may vary.


         eze flex w pap and cap 


 eZe Flex Outer Casing

Not every outer casing is the same.  We have ours made specifically for us at 160 gpf of high density plastic.  It meets or exceeds ASTM 405 and other specifications.  If you are not using eZe Flex no please take a moment to ask your current supplier to see their spec sheet.  And while you are at it, why not ask where their pex is made, because ours is made in the USA!





*Tested at 5 GPM and under load in typical installation and though we feel these results representative they are not warrantied nor guaranteed.


Z Supply, LLC manufactures eZe Flex, the best value in insulated pex and insulated pex-al-pex for outdoor wood boilers, solar hot water, ice melt, and other hydronic uses. Our products will work with all outdoor wood furnaces and are used by outdoor wood boiler dealers, distributors, and manufacturers across the USA and Canada. We also offer insulated pipe such as Watts R-Flex and Incotherm.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: